Epoxy Floor Coatings in Escondido CA - A Coating That Stays Bonded to the Slab
Stained, dusty or peeling concrete? We grind the slab and check it for moisture first, so the epoxy has clean concrete to grip.
What goes into an epoxy floor that doesn't peel?
Steadfast Escondido Epoxy Floors puts down epoxy floor coatings in Escondido, CA and many of the cities around it. The job starts with grinding the concrete to take off old coatings and leave a clean, dry surface, because epoxy has to soak into the slab to grip, and smooth, poorly prepped concrete is how floors end up peeling.
Most people call me when a garage floor is stained and dusty, or when a coating someone put down a few years back is lifting in sheets. The price moves mostly with the size of the floor and how much prep it needs, so old paint or glue that has to come off, cracks to fill and grit for a floor that gets wet all add to it, while a clean, bare slab costs less to get ready. The schedule turns on the concrete itself, because a slab that's still holding moisture or a new pour that hasn't finished curing has to wait before we coat it. If yours is a garage, our garage floor coatings page goes further into that job, and the estimate lists the prep and repairs your floor needs so you can see what the work includes.
- Licensed and fully insured.
- Free quotes on site.
- Expect a reply within 1 business day.
Epoxy, garage and shop floor coatings
How we put down an epoxy floor coating
Epoxy holds only as well as the prep under it, so our crew grinds the slab first, taking off old paint, sealers and glue and opening up the surface so the coating can soak in. We check the concrete for moisture before we pick an install date, because coating a damp slab is one of the surest ways to get a floor that lets go, and we fill cracks so the finish goes down over solid concrete. Then we put down the epoxy, and if the floor gets wet in use, we'll talk about adding grit to the coat so it isn't slick. I like a stubborn slab, and working out why an old coating failed is usually how we pick the right fix for yours.
The same prep carries over to bigger floors, so if you also look after a shop or warehouse, our commercial and industrial epoxy floor coatings plan the coating around heavier traffic and spills. At home, the job we do most is the garage floor coating, where the coat has to stand up to a car coming and going every day.
Why Escondido homeowners call Steadfast Escondido Epoxy Floors for epoxy
I come out to every estimate
I look at each job myself, and our crew does the prep and the install with me on the floor. The person who read your slab is there when it's ground and coated.
Slabs other crews pass on
We've been in business since 2017, and we're best known for floors covered in old glue, damp basements and coatings that keep letting go. I learned on garage and shop slabs next to my dad, so a hard floor gets me curious instead of nervous.
Licensed and fully insured in California
We're licensed and fully insured. California's exemption for unlicensed minor work stops at $1,000, and it only holds when the job needs no permit and the person hires no one for it, so it's worth asking anyone bidding your floor for their license.
A straight answer at the estimate
If epoxy isn't a good fit for your floor or for what you want from it, I'd rather tell you that at the estimate than find out later. You hear it before you've spent anything.
On an epoxy floor, the prep decides whether the coat holds, so send us a note, call (442) 999-8619 or email estimates@escondidoepoxyflooringandconcretepolishing.com with the floor's size in square feet, how old the slab is and whether it's painted, and I'll come take a look.
Get your slab looked at for an epoxy floor
Send the form and we'll get back to you within one business day to set a time. I'll come look at your slab for a free on-site estimate, with no obligation to book.
- Licensed and fully insured.
- Free quotes on site.
- Expect a reply within 1 business day.
What happens after you call about an epoxy floor?
Call and I pick up
You call (442) 999-8619, any day from 7 AM to 11 PM, and I'm the one who answers. We set a time for me to see the floor and hear what it has to put up with day to day.
I read the slab first
I look for moisture, old coatings and cracks before I write anything down, so the estimate covers the prep your floor really needs. You get that prep and any repairs written out, so you can see what the price includes before you decide.
We prep and coat the floor
Our crew grinds and coats with me on the job once the slab is dry enough to take the epoxy. If yours needs more time to dry out, we hold the install date instead of coating a damp floor.
Walk the finished floor together
I walk the floor with you before we pack up, so you see the finish up close and can ask about anything before we leave. Then it needs its cure time before you walk or park on it, which the questions below cover.
Epoxy floor questions we hear in Escondido
How much does an epoxy floor coating cost in Escondido?
Installed epoxy garage floor coating across the US usually costs about $3 to $12 per square foot, and that's a national range, not our price. Where your floor lands depends mostly on how much prep the slab needs, and your own figure comes from the on-site estimate. Every floor we coat is backed by our satisfaction guarantee.
How long after an epoxy coating can I walk and park on my garage floor?
At 68°F, one maker's epoxy needs at least 24 hours before foot traffic, 72 hours before light vehicles and 7 days before it reaches full chemical resistance. Plan where you'll walk and park for those days, since the floor is out of use while it cures.
How long does new concrete need to cure before an epoxy coating?
One maker recommends a new slab cure for at least 90 days, preferably, so the concrete can air dry and shrink before it's coated. If you've just poured, plan the coating for after that wait, not right after the pour, and we'll still check the slab for moisture first.
How do I know if my concrete is too wet for epoxy?
In one maker's test, you tape plastic down on the slab for at least 24 hours, and condensation or darkening under it means the concrete is too wet to coat. A slab that fails waits, which is why we check for moisture before we set an install date.
Does an epoxy garage floor get slippery when it's wet?
Yes, epoxy floor coatings are slippery when water or other fluids are on them, and one maker's guide advises adding enough non-skid material for how the floor is used. If your floor gets wet, tell me at the estimate so the grit is in your quote.
Do I need a permit for an epoxy floor coating in Escondido?
Escondido's permit exemption list doesn't answer it either way, because it names finish work like painting, tiling and carpeting but not epoxy floor coatings. If your job might need one, we talk through who pulls it before work starts, and when I'm not sure, I ask the city's building office instead of guessing.
Epoxy and concrete floors in nearby cities
Work that goes with epoxy floor coatings
Commercial & Industrial Epoxy Floor Coatings
If you also run a shop, warehouse or other work space, its slab takes forklifts, spills and steady traffic, and we plan the coating around that load.
Garage Floor Coatings
Many epoxy calls we get start in the garage, where hot tires, oil drips and a car parked every night decide how the floor gets prepped and coated.